A resin deck box is a convenient storage bay for patio cushions, garden items, pool products, toys, and more. Resin deck boxes are constructed of weather-proof plastic, and don't require as much maintenance as wood storage boxes. However, weather conditions like rain, sunlight, dust and pollen exposure, and humidity can cause the surface to become dirty, stained, or mildewed over time.
Correctly cleaning a resin deck box will preserve the original appearance, prolong the useful life of the deck box, and keep stored materials clean and dry. Good news is, you don't have to use costly cleaning products or equipment. Using a soft brush, mild soap and warm water, you can clean your outdoor storage box with ease.
This guide will illuminate cleaning techniques, methods to eliminate stubborn stains, how to avoid mildew and how to keep your resin deck box throughout the year.
Why Does a Resin Deck Box Get Dirty?
While resin is pretty resistant to moisture and outdoor wear, it is not entirely maintenance free. It can be affected by several environment factors.
Dust and pollen: Wind can drop dust, pollen, and particles on the lid, corners and textured surface.
Mold or mildew can grow if there is damp weather, insufficient ventilation, and organic materials. This is especially likely to happen in the outdoors where shade provides the moisture, and organic debris accumulates.
In prolonged wet conditions, deck boxes near gardens, lawns or swimming pools can become coated with green algae.
Spills, grease, sunscreen and food stains can cause marks that can become increasingly challenging to lift over the years.
Some resins may discolor over time or be a more apparent surface discoloration due to exposure to the sun's ultraviolet rays.
When you clean regularly, dirt does not get buildup, and you can easily find out if there are any problem areas that could get tougher if you didn't act now.
What You Need to Clean a Resin Deck Box
Before starting, gather the following supplies:
- Mild dish soap or a gentle household detergent
- Warm water
- A bucket or garden hose
- A soft sponge or microfiber cloth
- A soft-bristle cleaning brush
- A clean towel
- Rubber gloves, if needed
- A soft toothbrush for corners and grooves
These are the basic items that are needed for most basic cleaning jobs. Do not use scouring pads, steel wool or harsh chemicals that the manufacturer hasn't approved for use. Aggressive cleaning products may ruin the finish, stain the resin or affect some of the plastic parts.
If you will be following the instructions on a commercial cleaner, first test it on a small inconspicuous area, and then refer to the label.
Step-by-Step Guide: How to Clean a Resin Deck Box
Step 1: Empty the Deck Box
Empty the box of cushions, gardening tools, toys, pool accessories, etc. This will enable you to clean the inside thoroughly without getting water on stored goods or cleaning products.
Check for mildew, dirt or dampness in the material. Cushions and fabrics that have a musty odor should be cleaned, dry and stored per the guidelines.
Step 2: Remove Loose Dirt and Debris
When cleaning the outside, use a dry microfiber cloth or soft brush to dust off any loose dust, leaves, pollen or cobwebs.
Be sure to clean the lid, hinges, handles, corners and textured areas where dirt can collect. Open the lid and sweep out debris from the inside, too.
If the box is very dusty or dry muddy, wash it off with a garden hose. For normal outdoor cleaning, a low pressure water stream will work.
Step 3: Prepare a Mild Cleaning Solution
Make a small solution of mild dish soap and warm water in a bucket. The solution should be somewhat soap-like, but not too strong.
Avoid mixing different cleaning chemicals. Avoid using bleach in combination with ammonia or acidic cleaners, as toxic fumes may be produced.
The first type of cleaning solution to go to is a mild soap solution, which is effective in removing the typical dirt and grease from your resin that you might encounter in your daily use without being so harsh on the resin as to put it in contact with strong chemicals.
Step 4: Wash the Exterior Surface
Dip the soft sponge or microfiber cloth in the cleaning solution, and gently clean the exterior of the car.
Do work from the top level down so as not to let dirty water run over the areas that have been cleaned. Apply light pressure to stains that are visible and make small circles to lift them.
Use a soft bristle brush to get into recessed patterns and grooves for textured resin surfaces. A soft toothbrush will be useful in cleaning the narrow areas around molded areas, handles and hinges.
Be sure to check the underside of the lid and bottom edges for moisture and debris.
Step 5: Clean the Interior
Clean with the same mild soap solution the inside walls and floor. Clean corners and seams and look for any residue from stored items.
Wash any interior of the unit that smells bad and dry it out completely, if necessary. If odours are still present, it may be because there is a build up of moisture, mildew or contaminated items that require special cleaning.
If your deck box is perforated with holes, make sure that those holes haven't been clogged with leaves or dirt. When working around hinges, locks and other hardware, follow manufacturer's directions for cleaning.
Step 6: Rinse Away Soap Residue
Rinse off the box completely with clean water. Do not leave any detergent on the lid, inside walls, handles or bottom.
Soap residue might draw dirt or cause of leaving streaks after drying. If there are places that are hard to rinse, wipe them down with a damp microfiber cloth to get rid of any suds.
Do not use high pressure water on hinges, seals or joints unless the manufacturer states it is safe.
Step 7: Dry the Deck Box Completely
Dry with a clean towel and then place the lid on an open rack in a well-ventilated space to allow drying of the interior and exterior.
If cushions, blankets, paper products or other items that absorb moisture will be placed in the box, drying is especially important. A damp deck box that is closed will become full of moisture and allow mildew to grow.
When the box is completely dry put the cleaned items back in the box and secure the lid.
How to Remove Stubborn Stains from a Resin Deck Box
Standard soap and water cleaning will get most dirt but some will need special cleaning.
Removing Mold and Mildew
Small patches of mildew can be treated by washing the surface with mild detergent and water. Loosen the residue with a soft brush, and then rinse well.
When persistent growth occurs, refer to the manufacturer's recommendations for the proper cleaning product to use. Certain resin formulations may be discolored or ruined by some products.
Use proper protection, have adequate ventilation and do not mix cleaning agents. If the material is very discolored or is growing again, check the storage area for moisture issues.
Removing Green Algae
Resin deck boxes in wet, shaded areas tend to develop green buildup. Use cheap soap solution, and gently brush the affected area with a soft bristle brush.
Rinse thoroughly and dry. Enhancing air circulation and minimizing standing water can help prevent future algal growth.
Removing Grease and Sunscreen Marks
They may not go away in a snap if you use grease or sunscreen, or there's an oily residue. Spot the stain with a mild dishwashing solution, leave it to sit for a short time, then clean with a soft sponge.
Repeat if needed; don't go straight to a strong solvent. Do not use acetone, paint thinner and other high-impact solvents, unless the manufacturer states it is safe to use.
Removing Scuff Marks
A damp microfiber cloth and mild soap should be used for light scuff marks. If you do have marks, a nonabrasive sponge might help.
Always use any more intensive cleaning technique in an inconspicuous area. There are decorative finishes in some resin surfaces that can get dull if scrubbed too hard.
How Often Should You Clean a Resin Deck Box?
The best cleaning schedule will vary by climate, environment and frequency of use of the box.
A general rule is to clean regularly every 1-2 weeks and more frequently as needed. Boxes in high pollen, coastal, garden or rainy environments may require more frequent attention.
Check after storms, prolonged periods of wet weather, for trapped moisture and debris in the interior, seams and lid.
It's also a good idea to clean everything from time to time before you store outdoor cushions for the winter or get out patio furniture for the spring.
How to Keep a Resin Deck Box Clean Longer
There are a variety of simple preventative measures that can save you time in cleaning and help keep your outdoor storage investment safe.
Find an appropriate site: Set the box on a firm, well drained surface. Avoid watering outside where water stagnates or water from sprinkler systems is constantly on the exterior surface.
Do not open the lid. A tight fitting lid decreases the amount of rain water, leaves and airborne debris entering. Test hinges and latches for proper operation.
**Improve ventilation.** If it is dry, periodically open the lid to allow fresh air to circulate. Never leave damp or wet gardening tools or cushions in a room for extended periods.
Wipe up spills quickly. Clean up food, drink, and grease spills up before they get dirt on them or are hard to clean up.
Don't allow unwanted abrasion to the surface from sharp objects or scratch the finish with rough brushes.
Regularly check the box for cracks, broken hinges, missing fasteners, or clogged drainage holes. Solving these problems at an early stage can aid in maintaining the function of the box.
When the deck box will be used outdoors all year round, consider part-shade placement if possible. If the box requires some degree of UVA and UVB exposure, shade can be used to decrease it.
Common Mistakes to Avoid When Cleaning a Resin Deck Box
Several cleaning mistakes can damage the material or make maintenance more difficult.
- Using abrasive tools: Steel wool and rough scouring pads may scratch the surface.
- Applying harsh chemicals without testing: Strong solvents and concentrated cleaners may cause discoloration or material damage.
- Using excessive water pressure: High-pressure washing can force water into joints or damage certain components.
- Closing the box while it is damp: Trapped moisture can contribute to musty odors and mildew.
- Ignoring the interior: Dirt and moisture inside the box can affect stored cushions and other belongings.
- Using unapproved coatings: Paints, waxes, and surface treatments may interfere with the resin finish or leave unwanted residue.
Always do the manufacturer's maintenance, particularly for boxes with special coatings or built-in hardware.
Frequently Asked Questions
Can I use vinegar to clean a resin deck box?
Mild soap and water should be your first choice. For some household cleaning, diluted vinegar is used, but not all types of resin and surface finish are compatible. Test a small, concealed area before using it according to manufacturer's instructions.
Can I pressure-wash a resin deck box?
Typically, a garden hose and soft brush will suffice. High pressure washing is not required for regular maintenance tasks and can cause damage to hinges, joints or surface if not done properly. If you're thinking about using a pressure washer, consult with the product manufacturer.
How do I remove a musty smell from my deck box?
Remove objects from the box and rinse with a mild detergent, then dry the inside well and open the lid to air dry the box. Wash any contaminated clothing articles separately. If the odor persists, look for moisture, leaks or recurring mildew.
Can a resin deck box stay outside all year?
Many resin deck boxes are specifically marketed as outdoor items, and their durability is reliant on the material used, on how they are built, on the weather conditions that they are exposed to and on the manufacturer's specifications. Please check product specifications for temperature range, UV resistance, and winter storage.
Should I apply a protective coating after cleaning?
Routine washing and drying generally will suffice. Never use automotive polish, wax, paint or other coatings unless they are recommended for the type of resin.
Conclusion
Cleaning a resin deck box is not a difficult task to undertake, and it is an effective way to keeping the deck box looking great and making outdoor storage more sanitary. In most cases, the easiest way to clean a box is to clear away any loose dirt and then use mild soap and warm water to scrub away stuck-on dirt, rinse thoroughly and let the box dry.
Regular upkeep is better than intensive cleaning. To keep your resin deck box clean, working and beautiful for years, follow these steps to prevent moisture accumulation, clean up stains early and follow the manufacturer's care instructions.
It can be used for a variety of purposes, such as holding patio cushions, garden tools, pool accessories, and seasonal outdoor items. A basic cleaning schedule can help it last longer.